Repetier server crek how to#
Repetier server crek install#
Repetier server crek drivers#

Note Printer-Monitor version 2.5 and later include ArduinoJson (version 5.13.1). Packages - the following packages and libraries are used (download and install):

Repetier server crek how to#

Use the Arduino guide for details on how to installing and manage libraries Loading Supporting Library Files in Arduino Set 1M SPIFFS - this project uses SPIFFS for saving and reading configuration settings.Select Board: 'LOLIN(WEMOS) D1 R2 & mini'.

Repetier server crek install#

Open Boards Manager from Tools > Board menu and install esp8266 Core platform version 2.5.2.This will add support for the Wemos D1 Mini to Arduino IDE. You can add multiple URLs, separating them with commas. Enter into Additional Board Manager URLs field.

Repetier server crek drivers#

You will need to configure Arduino IDE to work with the Wemos board and USB port and installed the required USB drivers etc. 1_mini_easyboard_repetier.bin - Repetier version compiled for Easy Monitor Board for the smaller 0.96' SSD1306 OLED (SDA -> D2 and SCL -> D1).1_mini_easyboard.bin - Version compiled for Easy Monitor Board for the smaller 0.96' SSD1306 OLED (SDA -> D2 and SCL -> D1).1_mini_repetier_SH1106.bin - Repetier version compiled for Wemos D1 Mini for the larger 1.3' SH1106 OLED.1_mini_repetier_SSD1306.bin - Repetier version compiled for Wemos D1 Mini for the smaller 0.96' SSD1306 OLED (default).1_mini_SH1106.bin - compiled for Wemos D1 Mini for the larger 1.3' SH1106 OLED.

1_mini_SSD1306.bin - compiled for Wemos D1 Mini for the smaller 0.96' SSD1306 OLED (default).

From the main menu in the web interface select 'Firmware Update' and follow the prompts. In version 2.3 and on you should find binary files that can be uploaded to your printer monitor via the web interface. Version 2.2 introduced the ability to upgrade pre-compiled firmware from a binary file. for 0.96' With Easy Monitor Board Upgrading from version 2.2 or Higher Wiring for the Wemos D1 Mini to the I2C SSD1306 OLED Note: Using the links provided here help to support these types of projects.

(optional) Pre loaded Monitor Board kit:.

(optional) 1.3' I2C OLED Display: (must uncomment #define DISPLAY_SH1106 in the Settings.h to use the 1.3' SSH1106 display).

Repetier support added in version 3.0 - define in Settings.h.

Can query the Octoprint PSU Control plugin to enter clock or blank mode when PSU is off.

Version 2.2 added the ability to update firmware through web interface from a compiled binary.

Basic Authentication to protect your settings.

Supports OTA (loading firmware over WiFi connection on same LAN).

Fully configurable from the web interface (not required to update Settings.h).

Sample rate is every 10 seconds when printing.

Sample rate is every 60 seconds when not printing.

Option to display Current Weather when printer is off.

Option to display 24 hour clock or AM/PM style.

Option to display a clock screen instead of sleep mode.

Screen turns on when printer is Operational or connected.

Screen turns off when printer is turned off or disconnected.

Option to display time and weather when printer is idle.

Displays the print status from OctoPrint or Repetier Server.

New 3D printed case design for Monitor Board kit:.

Now available is the Pre Loaded Monitor Board Kit that comes ready to plug and play on your network. Printer Monitor (OctoPrint 3D Printer Monitor) New Easy Monitor Board Kit: